Professional Camera Modes: How to Decide Which Professional Exposure Mode to Use

To contact us Click HERE

Learning to Use my DSLR – Practical Photography Tutorials

When I wrote my first photography post on taking better pictures of your kids in the snow, I realized that I didn’t know how to choose which professional mode to use. This seems to be a pretty fundamental gap in knowledge so I decided I should figure it out.

It became clear pretty quickly that understanding what exposure is would be a good first step. I won’t go into a lot of detail - hopefully just enough.

Put simply, exposure is how much light is falling on your camera’s image sensor (in the past it would be how much light fell on your film). To get a clear, crisp image you don’t want too much light (overexposed) or too little light (underexposed) landing on your sensor.

Three related factors impact what your exposure will be: ISO, Aperture and Shutter Speed. To get a good exposure these three factors have to be balanced correctly and making changes to one will necessitate making changes to one or both of the other factors.

ISO – This is how sensitive your camera’s sensor is to light. With film cameras, you had different film ‘speeds’ that you had to change if you wanted a different level of sensitivity. For digital cameras you can change the ISO just by manipulating your camera’s settings. The higher the ISO number, the more sensitive your sensor will be to light. This means you don’t need as much light for a good exposure but the image quality is reduced when your sensor is more sensitive.

Eg.
If you are outside on a sunny day, you may want your ISO to be as low as 100.
If you are inside you may want your ISO to be 400 (more sensitive due to less ambient light).
If you are taking a low light photograph you may need to set your ISO to a very high number. (your image will be more grainy but at least you can get the shot).

In general, you want to set your ISO to the lowest number you can to get the best image quality but to get a good exposure, you need to increase the ISO in lower light settings.

By bumping up the ISO to 1600, I was able to get this photo of Nicole is a very dark room.

When you zoom in on the picture you can see the trade off of using the high ISO - although the exposure is pretty good, there is more noise resulting in image that is grainy.

Aperture (or f-stop) – this is how much light passes through your lens at once. A larger aperture will result in more light passing through and a smaller aperture will result in less light passing through. Manipulating the aperture also effects the depth of field (how much of your image is in focus).

Eg.
To get a good exposure outside on a sunny day, you would need a narrower aperture such as f/4.
To get a good exposure in a low light setting you may need an aperture such as f/22.

In these pictures I manipulated the aperture. You can see how it changed the depth of field. In the photo on the right the background is quite blurry and the focus is just on Gordie. In the photo on the right the background is more in focus and pretty distracting.

Shutter Speed – This is how long light is allowed to hit the sensor. The shorter your shutter speed, the less light will hit the sensor. The longer the shutter speed the more motion you will capture as well.

Eg.
On a sunny day you may want a short shutter speed of 1/4000.
In a low light setting you may want to capture light for a longer period of time using a shutter speed of 1/60.

Here’s an example of a long shutter speed with a moving subject. Although in this instance it was not what I had intended, it can be an interesting effect. Kids move so fast it can be helpful to shorten the shutter speed to help photograph them without motion blur.

These three factors are inter-related, so when you change one you may need to change one or more of the others to get a good exposure. For non-professional photographers like myself (and I’m assuming you if you’re reading this) it can be helpful to let your camera make some of the decisions while you manipulate the one you are most interested in. Picking the right professional exposure mode can help you do this.

P – Program Mode:

This mode would be perfect if you want to make some manipulations but have your camera do most of the heavy lifting. In this mode you can change things like the white balance, exposure compensation, ISO, and metering. This would have been perfect for me to use for my post on taking better pictures of your kids in the snow (I used the Aperture Priority Mode instead). I wasn’t trying to change the aperture or shutter speed. This can also be a helpful mode if you are going to be taking photos in a variety of lighting conditions.

In these pictures I was only manipulating the exposure compensation, to brighten up the snow. That would be a great use of Program Mode.

A – Aperture Priority Mode

In this mode, you manipulate your camera’s aperture while your camera handles the rest of the exposure settings. This will allow you to change the depth of field or how much of your photo is in focus. This is particularly great for photographs so your subject is in focus but the background is blurred. You can also use it to make sure that everything in your shot is in focus. You would likely want this mode while photographing landscapes, portraits, architecture, close up photography (think food or flowers) and wildlife.

S – Shutter Priority Mode

This mode is similar to Aperture Priority mode but in this case, you manipulate the shutter speed while your camera handles the rest of the exposure settings. This mode is best to use when your subject is in motion. You can use it freeze the action by setting it to be quick or to show motion by leaving it longer. You would probably want to use this mode if movement was a big aspect of your subject or the photo effect you want. This can also be highly useful for photographing kids!

M – Manual Mode

In this mode, you have the most control, but it’s also the hardest to use. At this stage of my photography I don’t want to use this mode and if you’re reading this I’m assuming you don’t either!

A Word About Scene Modes

Your camera will probably also have a number of pre-set Scene modes. There’s absolutely nothing wrong with trying them out too. Those modes use all the same principles I discussed above – pre-selected to try to create the best exposure for that kind of setting. Eg. the night mode will use a wide aperture to let in a lot of light at once and a longer shutter time, the action mode will use a quick shutter speed. There’s nothing those pre-sets can do that you shouldn’t be able to do yourself.

Learn Along Assignments:

1. Experiment with ISO

1. Take your camera into a setting with not much light.
2. Put it into Program Mode
3. Set your ISO to a really high setting (like 1600)
4. Try taking a picture. (Make sure you are keeping your camera steady)
5. Now set your ISO to a lower number (like 400).
6. Compare your results

2. Experiment with Shutter Speed

1. Pick an subject that is moving. (Like your kids!)
2. Put your camera into Shutter Priority Mode
3. Try taking pictures at different shutter speeds
4. Compare your results

3. Experiment with Aperture

Note: this is the hardest one to play around with. My camera will let me set my aperture to settings that don’t work well with my lens. I will be doing a tutorial on using the aperture setting in the near future.

If you would like to play around with it before that here’s what I recommend:

1. Set your camera to Aperture Mode.
2. Somewhere on your lens it will say something like 1:3.5-5.6G. Start by setting your aperture to within these numbers to start.
3. Select an subject that is in front of a busy background. Making sure there is some distance between your subject and the background will make it easier to see the effect.
4. Take photos with different aperture settings.
5. Compare your results

4. Let me know how it went!

 

Resources Used for this article:

http://digital-photography-school.com/iso-settings

Nikon D3200 From Snapshots to Great Shots by Rob Sylvanc